JCB unveils new mini excavator and dumper machines

3TE dumper and 26 C-1 mini excavator at JCB launch event 3TE dumper and 26 C-1 mini excavator at JCB launch event (Photo: PPI)

JCB has unveiled two new additions to its extensive machine range. The new models are the 26 C-1 mini excavator and the 3TE dumper.

The 26 C-1 is a 2.5-tonne mini excavator which fills a weight gap in the JCB machine range.

The unit uses a three-cylinder KSD engine from Kohler.

This naturally-aspirated powerplant produces 18.4 kW (24.6 hp) at 2200 rpm and delivers maximum torque of 90 Nm at 1800 rpm.

This all-new mini excavator was redesigned from the ground up using all-steel bodywork. Other key features of the machine include hoses routed through the boom to improve visibility and a new bucket design. There is also an automated ‘health check’ at start up to support machine maintenance and extend availability.

The 26 C-1 weighs in at specifically 2675 kg. This allows the machine to be towed with a standard class driving license, making it ideal for the rental sector. This unit will be joined later by the 25 Z-1 (2350 kg) mini excavator.

The 3TE is a swivel tip dumper which features an all-electric drivetrain. With a three-tonne capacity, it also fills a product gap in the JCB range. The machine features two electric motors which have a combined output of 38.4 kW. The dual setup supports fulltime four-wheel drive.

Power is delivered from a 20 kW li-ion battery pack. This is located within the vehicle body which is said to make the pack ‘very difficult to remove’, which should help with site security. JCB offers a five-year warranty on the battery pack.

There are two onboard charging points. Recharging can be completed using a 110/230 V connection which delivers a 20 to 80% recharge in about eight hours. There is also a 415 V recharge connection which supports a 0 to 100% recharge in about two hours.

Other features of the 3TE include a two-step drive security system, which requires the operator to be seated and the seatbelt fastened before the machine will move. There is also a brief alarm sound to indicate the machine is starting to move – key to a machine which makes no engine noise.

An inclinator gauge shows the operating angle and sounds a warning if the machine is approaching a dangerous angle.

The 3TE comes with a five-year subscription to the JCB LiveLink system which collects telemetry data to better understand machine use and maintenance schedules.

STAY CONNECTED

Receive the information you need when you need it through our world-leading magazines, newsletters and daily briefings.

Sign up

CONNECT WITH THE TEAM
Andy Brown Editor, Editorial, UK - Wadhurst Tel: +44 (0) 1892 786224 E-mail: [email protected]
Neil Gerrard Senior Editor, Editorial, UK - Wadhurst Tel: +44 (0) 7355 092 771 E-mail: [email protected]
Catrin Jones Deputy Editor, Editorial, UK – Wadhurst Tel: +44 (0) 791 2298 133 E-mail: [email protected]
Eleanor Shefford Brand Manager Tel: +44 (0) 1892 786 236 E-mail: [email protected]